FrameResultsSet Fields |
The FrameResultsSet type exposes the following members.
Fields| Name | Description | |
|---|---|---|
 | BucklingResults |
Design results according to Eurocode 3
|
| Deltax |
Absolute longitudinal deformation of the member
|
| DuctilityDesignResults |
Ductility design results for this frame element
|
| MomentDiagramType_AnnexA |
Moment diagram type for this load combination, as per Table A.2
|
| MomentDiagramType_AnnexB |
Moment diagram type for this load combination, as per Table B.3
|
| MsMoment_AnnexB |
Ms moment value for MomentDiagramType_AnnexB=2 or =3, as per Table B.3
|
| Name |
The name of the load case, eg "Load combo 1"
|
| SeismicCombo |
True if this load set is seimsic
|
| Stations |
Stations list for this results set
|
| UniformLoady |
true is there is a uniform load acting in y axis
|
| UniformLoadz |
true is there is a uniform load acting in z axis
|
| WheelPosition |
Wheel poisition case, needed only in case of Runway Beams, EN 1993-6
|
| xe |
Distance xe according to Figure 6.2, EN 1993-6
|
See Also