RunwayBeamInputData Fields |
The RunwayBeamInputData type exposes the following members.
Fields| Name | Description | |
|---|---|---|
 | CraneFlangeConnectionCase |
Describes how crane is connected to the runway beam flange, according to Table 5.1, EN1993-6
|
| DesignValueOfWheelLoad |
Design value of wheel load for checking against web/bottom flange failure, or reversible behaviour
|
| DetailCategoryOfTopFlangeToWebJunction |
Top flange to web junction detail category, according to table 8.10 EN 1993-1-9
|
| Distance_n |
Distance from the centerline of the wheel load to the free edge of the flange
|
| DistanceBetweenLateralRestraints |
Distance between lateral restraints for vibration check of bottom flange
|
| DistanceBetweenTransverseStiffeners |
Distance between transverse stiffeners (if any)
|
| DistanceBetweenWheels |
Wheel spacing, defined as xw in figure 6.2, EN 1993-6
|
| ey |
Wheel eccentricity given in 2.5.2.1(2) of prEN 1991-3
|
| Qmaxi |
Wheel load to consider in check against fatigue
|
| RailSection |
The rail section of the runway beam
|
| UseOfTransverseStiffeners |
True, if transverse stiffeners are used, otherwise false
|
| WheelLoadsOnTopFlange |
True, if wheel loads are applied on top flange, otherwise false
|
See Also