FrameElement Class |
Inheritance HierarchyNamespace: EC3Design
Assembly: EC3Design (in EC3Design.dll) Version: 1.0.0.0 (1.0.0.0)
SyntaxThe FrameElement type exposes the following members.
Constructors| Name | Description | |
|---|---|---|
 | FrameElement |
Initialization of a frame element
|
Properties
Methods| Name | Description | |
|---|---|---|
| Check |
Performs the checks of the frame element for resistance and buckling and fills the corresponding Results objects
|
| Equals | (Overrides ObjectEquals(Object).) |
Fields| Name | Description | |
|---|---|---|
 | EndingNode | |
| EndingReleaseRX | |
| EndingReleaseRY | |
| EndingReleaseRZ | |
| EndingReleaseTX | |
| EndingReleaseTY | |
| EndingReleaseTZ | |
| FrameResultsSets_DEAD_SLS |
Dead load combinations included in each SLS combination
|
| FrameResultsSets_LIVE_SLS |
Live load combinations included in each SLS combination
|
| FrameResultsSets_SLS |
SLS combinations
|
| FrameResultsSets_ULS |
ULS combinations
|
| ID |
ID of Frame Element
|
| Length |
Length of Frame Element
|
| Material |
Material of Frame Element
|
| PointInPlaneXY | |
| Section |
Section of Frame Element
|
| SeismicOnlyLoads |
Combinations with seismic-only loads included in seismic combination
|
| SeismicVericalLoads |
Combination with vertical loads included in seismic combination
|
| StartingNode | |
| StartingReleaseRX | |
| StartingReleaseRY | |
| StartingReleaseRZ | |
| StartingReleaseTX | |
| StartingReleaseTY | |
| StartingReleaseTZ | |
| Story | |
| Suspectible_to_Torsional_Deformations |
Specifies whether the element is suspectible to torsional deformations, as per Table B.1 (Annex B)
Valid only if the interaction factors kij are calculated according to Annex B
|
| Type | |
| za |
Z coordinate of load application point on section (input)
|
See Also