Column Fields |
The Column type exposes the following members.
Fields| Name | Description | |
|---|---|---|
 | BracedAboutMajorAxis |
Has to be set true, if the column is braced about its major axis (in xz local system)
|
| BracedAboutMinorAxis |
Has to be set true, if the column is braced about its minor axis (in xy local system)
|
| DuctilityDesignParameters | |
| DuctilityDesignResults | |
| EndingNode | (Inherited from FrameElement.) |
| EndingReleaseRX | (Inherited from FrameElement.) |
| EndingReleaseRY | (Inherited from FrameElement.) |
| EndingReleaseRZ | (Inherited from FrameElement.) |
| EndingReleaseTX | (Inherited from FrameElement.) |
| EndingReleaseTY | (Inherited from FrameElement.) |
| EndingReleaseTZ | (Inherited from FrameElement.) |
| FrameResultsSets_DEAD_SLS |
Dead load combinations included in each SLS combination
(Inherited from FrameElement.) |
| FrameResultsSets_LIVE_SLS |
Live load combinations included in each SLS combination
(Inherited from FrameElement.) |
| FrameResultsSets_SLS |
SLS combinations
(Inherited from FrameElement.) |
| FrameResultsSets_ULS |
ULS combinations
(Inherited from FrameElement.) |
| ID |
ID of Frame Element
(Inherited from FrameElement.) |
| Length |
Length of Frame Element
(Inherited from FrameElement.) |
| Material |
Material of Frame Element
(Inherited from FrameElement.) |
| PointInPlaneXY | (Inherited from FrameElement.) |
| Section |
Section of Frame Element
(Inherited from FrameElement.) |
| SeismicOnlyLoads |
Combinations with seismic-only loads included in seismic combination
(Inherited from FrameElement.) |
| SeismicVericalLoads |
Combination with vertical loads included in seismic combination
(Inherited from FrameElement.) |
| StartingNode | (Inherited from FrameElement.) |
| StartingReleaseRX | (Inherited from FrameElement.) |
| StartingReleaseRY | (Inherited from FrameElement.) |
| StartingReleaseRZ | (Inherited from FrameElement.) |
| StartingReleaseTX | (Inherited from FrameElement.) |
| StartingReleaseTY | (Inherited from FrameElement.) |
| StartingReleaseTZ | (Inherited from FrameElement.) |
| Story | (Inherited from FrameElement.) |
| Suspectible_to_Torsional_Deformations |
Specifies whether the element is suspectible to torsional deformations, as per Table B.1 (Annex B)
Valid only if the interaction factors kij are calculated according to Annex B
(Inherited from FrameElement.) |
| Type | (Inherited from FrameElement.) |
| za |
Z coordinate of load application point on section (input)
(Inherited from FrameElement.) |
See Also